Revo Blog
  • The Driven
  • News
  • Reviews
  • Shows
  • The Basics
  • Find a REVO dealer
  • Power Addicts
  • Subscribe
  • Return to onlyrevo.com
Subscribe
Revo Blog
Revo Blog
  • Products
  • The Basics

Aftermarket Air Intake Systems – Even more information.

  • March 1, 2020
  • Mark Eting

An In-Depth Look into Air Intake Systems.

We offer various solutions for various models – go to Product page and the options will show.

So, let’s take a closer look at each of the components involved in these three air intake systems. Breaking down their benefits to understand what each part does so you can judge what’s right for your car with proven facts.

Revo Pro Panel Filter (for OEM+ kits)

  • Designed to increase horsepower and rate of acceleration
  • Exceptional filtration
  • High air flow with three layers of foam
  • Lifetime warranty
  • Lasts up to 60,000 miles before cleaning is required depending on driving conditions
  • Works with original manufacturers airbox

The Revo ProPanel is a high-grade direct replacement filter for your vehicle. Designed as direct replacement filters to fit inside your factory airbox and are suitable for road or competition use.

Foam filters offer a number of significant benefits over paper or polyester types.

Why choose foam? Because, compared to paper or other filter technologies, reticulated polyester foam achieves optimum performance against three key criteria:

  • Maximum airflow: the ability to allow air to pass through without causing a large drop in pressure.
  • Cleaning efficiency: the capability to arrest a high proportion of airborne dust while feeding the engine clean air.
  • Dust load-up tolerance: the capability to absorb a large amount of dust without reducing air flow capacity.

This design of filter has been used in all fields of motorsport from Formula 1 to the World Rally Championship. The range receives this same attention to detail at the design stage and is then taken into production with consummate quality.

Revo ProPanel Filters use multi-layered foam technology to trap dust and dirt while maintaining flow efficiency over time. Using foam increases the filter’s surface area and is washable. Compared to standard paper and cotton filters which trap dust on the surface and become less efficient the more they are used, choking the engine and reducing performance.

The outer core is a coarse foam designed to trap larger particles, the second layer is a medium foam designed to trap most particles and the inner core is fine foam which will trap any particles small enough to reach it.

The triple layer foam design ensures an exceptional level of engine protection and long-term performance advantage.

  • Emissions legal in all 50 US states
  • Will not void vehicle warranty
  • Lifetime warranty (to original purchaser with proof of purchase)

Revo Turbo Inlet Hoses

  • Up to 12WHP and 15NM gains

The Revo Turbo Inlet Hose has been designed and engineered to directly replace the stock pipe and elbow. It offers a high-quality single piece replacement for the OEM parts which allows for smoother uninterrupted airflow, improving the throttle response and performance of your vehicle.

The Revo machined inlet replaces the restrictive elbow. The machined billet aluminium inlet securely fits the OE unit using locking tabs and integrated O-rings.

With almost double the cross-sectional area compared to other available products, air can stabilise and distribute before a smooth tapered transition to the turbo. Removing the internal steps between components further ensures uninterrupted airflow and removes any unnecessary turbulence.

The Revo hose has an increased inner diameter that gradually tapers from airbox to turbo to optimise airflow while maintaining the tolerances required to fit both LHD and RHD vehicles with a standard airbox.

Designed to directly replace the plastic hose and turbo elbow, this upgrade reduces restriction and maximises smooth airflow improving both power and torque throughout the rev range.

A four-ply construction with an internal wire helix increases strength to prevent collapsing under pressure. Internal steps flush fit against the stock airbox and the machined inlet, creating a smooth transition between components ensuring the smoothest airflow possible to the turbo. A machined bung is integrated into the hose, connecting the stock PCV system vacuum.

These are a precision OE fit and feature a wire helix incorporated in the design to prevent any collapse under negative pressure from the turbo regardless of how much power you run. The inner wall of the inlet is also optimised in design and smoothed to remove any turbulence and offer the best possible airflow.

They’re made from a Nomex material to withstand heat, as well as to resist fading and perishing.

Carbon Series Air Intake System

The Revo Carbon Series Air Intake System offers unparalleled performance benefits along with a striking visual addition to your engine bay.

Available for a number of different models including Audi TTRS, RS3, Ford Focus RS and MQB chassis vehicles – click HERE to choose yours.

Let’s take a look at the most popular Carbon Series kit in the range – for the MQB platform – to give an idea of performance gains.

The MQB kit comes complete with a matching Carbon Series front scoop, lid, back-pipe and Pro-Panel filter completely replaces any restrictive elements of the OEM intake system. This decreases turbulence allowing a larger volume of air to reach the turbo more quickly.

  • With proven gains.

Impressive results in comparison to the standard set up, peak results showed up to +41 WHP and +42 NM over stock with an average of +19WHP and +25NM throughout the rev range.

The Revo Carbon Lid has been designed to increase air box volume and promote smoother airflow. The closed air system helps eliminate heat soak whilst directing cold air through its curved design directly to the oversized outlet.

  • 16% Larger Air Box Outlet
  • Improves Air Flow Efficiency
  • Carbon Series Quality

The Revo Carbon Air Scoop directly replaces the OEM front panel and directs cold air to the utilising an internal fin. The second feed of cold air into the engine bay helps keep ambient temperatures lower.

  • Increased Airflow
  • Internal Fin & Engine Bay Vent
  • Carbon Series Quality

The Revo Turbo Inlet Hose is a high-quality single piece replacement for the restrictive OEM parts and promotes smoother uninterrupted airflow, improving throttle response and the performance of your vehicle.

  • Increased Diameter for Carbon Lid
  • Turbo Matched Inlets
  • Constant Taper for Smoother Flow

All Revo products are designed in-house, allowing our team of engineers to rigorously test products during the design process. Only Revo offers a kit with a 16% larger lid outlet and matching hose, ensuring maximum performance at even Stage 3 and above specification.

Full Kit Includes

  • 90mm Turbo Inlet Hose
  • Machined Inlet
  • Carbon Air Box Lid
  • ProPanel Air Filter
  • Carbon Front Section
  • Coolant Relocation Hose

Revo Open Cone

Revo Open Cone Systems completely replace the OEM air intake for those who like to announce their vehicle is far from standard. Along with an aggressive intake sound, more air means access to more power throughout the rev-range.

Ensuring the engine can get access to enough air is paramount when increasing power, an open cone air-intake system is the most effective way of achieving this, but not all products are made equal.

Having worked with a number of intake solutions during software development Revo noticed a lack of high quality and more importantly, high flowing kits available.

Working alongside some of the biggest names in the air filter industry, we engineered and designed what is still one of the highest flowing kits available.

The pioneering design allows air to reach the turbo as quickly as possible whilst minimising turbulence and restriction. As a result, boost can be maintained for longer, giving you access to more power throughout the rev-range along with a more aggressive sound, and performance you can feel all the way to the redline.

Intake Pipe

The Revo engineering team knew that to create the most effective kit, every component had to be considered to maximise and smooth airspeed. The system is designed around a lightweight 90mm intake pipe, mandrel-bent to maintain the internal diameter in the corners and to create a one-piece solution.

Mandrel-bent pipework ensures a consistent internal diameter.

This offers superior flow and avoids the air turbulence and resistance experienced on intake kits with multiple sections, usually caused at each join resulting in very turbulent airflow, ultimately restricting performance.

MAF Scaling

Ensuring correct MAF (Mass Air Flow) sensor scaling is the real art when it comes to designing air intake systems if incorrect the intake system can actually reduce power and cause major fuelling issues.

The Revo kit integrates the stock MAF sensor in a specifically designed housing on the one-piece pipe to ensure correct scaling during fitment.

Three Layer Foam Filter

An intake system is only as good as the filter. This kit comes complete with a tried and tested Revo three-layer foam filter, supported by galvanised, epoxy-coated mesh to ensure the filter cannot collapse.

The filter has a large external diameter body and a smooth radius aluminium bell mouth, specifically designed for optimum airflow from the filter to pipe-work.

Revo three-stage foam filters work very differently to conventional paper or cotton-gauze, which are surface filters designed to trap particles on the outer layer, instantly causing restriction.

Revo foam filters work by trapping dirt particles within each of the oiled foam layers, allowing air to negotiate its way through the filter, reducing restriction and offering much longer service intervals. We tested the filter at a leading motor testing centre ‘Mira’ on industry recognised dust load test.

On a full dust load test, the foam filter was found to still be 99.1% efficient, filtering down to 5 microns while offering the least amount of restriction over similar products.

We also flow test all of our products at a specific facility to ensure all of our claims are backed up by facts and proof. This way we can be 100% confident that Revo products offer EXACTLY the gains you expect.

It’s all about CFM (Cubic Feet per Minute) and flow velocity, but that’s another topic, for another day.

Heat Shield

The open cone intake system features a laser-cut aluminium heat shield that ensures the filter is well insulated from ambient under-bonnet temperatures. The shielding is designed to utilise the ducting in the factory grill to maximise airflow and prevent heat-soak.

Silicone Hose

The silicone hoses included in the kit are manufactured using high-quality automotive-grade silicone, engineered to combine the system using stepped necks to offer a smooth transition of air to avoid turbulence.

So that’s pretty much everything you need to know about air intake systems. Depending on the vehicle you own there will be various different systems available, but here are some helpful links:

  • Air filter & Intake Kits
  • Carbon Series
  • Cold Air Feed Ducting Components
Related Topics
  • Air Intakes
  • Airfilters
  • Carbon Series
  • OEM+
  • Open cone
  • Performance
  • performance software
  • Power
  • Tuning
Mark Eting

Previous Article
  • News

Revo updates on tuning the Bosch MD1 and MG1 ECU.

  • February 17, 2020
  • Mark Eting
View Post
Next Article
  • Press Release
  • Products

New cooling hardware for Audi TTRS 8s from Revo. ‘The most efficient intercooler we’ve ever created.’

  • March 2, 2020
  • Mark Eting
View Post

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Revo Blog

Input your search keywords and press Enter.